Terminal pins
Terminal pins are retracted at one end and cut off straight at the other end. They are predominantly used in the electrical industry as connecting elements, for plugs or for soldered joints.

Ordering example
Other dimensions regarding diameter or wall thickness which are not given in the table are also available.
For technical advice please do not hesitate to consult one of our engineers.
Material | Name | d1 | s | L | NA | d3 | Finish |
brass | terminal pin | 0,8 | 0,15 | 12 | 5 | 0,2 | clean |
brass terminal pin 0,8 x 0,15 x 12 mm, NA=5, d3=0,2, clean | |||||||
copper | terminal pin | 3 | 0,25 | 18 | 7 | 2 | tin plated min. 3 µm |
copper terminal pin 3 x 0,25 x 18 mm, NA=7, d3=2, tin plated min. 3 µm |
Dimensions (L, NA, d3) and finish as customer requires.
If nothing else has been prearranged we produce according the tolerances below:
tube-Ø | d1 | 0,8 | 1 | 1,2 | 1,25 | 1,3 | 1,4 | 1,45 | 1,5 | 1,6 | 1,7 |
Tol. | ±0,04 | ||||||||||
wall thickness | s±10% | 0,15 0,2 0,25 |
0,15 0,2 0,25 |
0,15 0,2 0,25 |
0,15 0,2 0,25 |
0,15 0,2 0,25 |
0,2 0,25 0,3 |
0,2 0,25 0,3 |
0,2 0,25 0,3 |
0,2 0,25 0,3 |
0,2 0,25 0,3 |
rib-Ø | d2±0,2 | 1,2 | 1,5 | 1,8 | 1,9 | 2,0 | 2,1 | 2,2 | 2,2 | 2,3 | 2,6 |
hole-Ø | d3±0,2 | 0,2 | 0,5 | 0,5 | 0,55 | 0,55 | 0,55 | 0,55 | 0,6 | 0,6 | 0,8 |
tube-Ø | d1 | 2,0 | 2,15 | 2,2 | 2,3 | 2,35 | 2,4 | 2,5 | 3 | 3,1 | 3,15 |
Tol. | ±0,04 | ±0,05 | |||||||||
wall thickness | s±10% | 0,2 0,25 0,3 |
0,2 0,25 0,3 |
0,2 0,25 0,3 |
0,2 0,25 0,3 |
0,2 0,25 0,3 |
0,2 0,25 0,3 |
0,2 0,25 0,3 |
0,25 0,3 0,4 |
0,25 0,3 0,4 |
0,25 0,3 0,4 |
rib-Ø | d2±0,2 | 2,9 | 3,1 | 3,2 | 3,2 | 3,2 | 3,4 | 3,5 | 4,2 | 4,3 | 4,3 |
hole-Ø | d3±0,2 | 1,1 | 1,2 | 1,2 | 1,2 | 1,2 | 1,3 | 1,4 | 1,6 | 1,6 | 1,6 |
tube-Ø | d1 | 3,2 | 3,3 | 3,4 | 3,5 | 3,6 | 3,85 | 3,9 | 4 | 4,5 |
Tol. | ±0,05 | ±0,07 | ||||||||
wall thickness | s±10% | 0,25 0,3 0,4 |
0,25 0,3 0,4 |
0,25 0,3 0,4 |
0,25 0,3 0,4 |
0,25 0,3 0,4 |
0,25 0,3 0,4 |
0,25 0,3 0,4 |
0,3 0,4 0,5 |
0,3 0,4 0,5 |
rib-Ø | d2±0,2 | 4,3 | 4,4 | 4,5 | 4,8 | 4,8 | 4,8 | 4,8 | 5,3 | 6,1 |
hole-Ø | d3±0,2 | 1,6 | 1,7 | 1,8 | 1,8 | 1,9 | 1,9 | 2,3 | 2,3 | 2,3 |
Dimension | L | NA | ||||
Tolerance | ±0,3 | ±0,15 |
Standard materials |
Materials on request |
Brass (Ms) | Aluminium (Al) |
Copper (Cu) | Stainless Steel (Est) |
Steel (St) |